Lighthouse Worldwide Solutions ApexR02p, Руководство оператора

Страница: 62 / 74

ApexRp Operators Manual
61 248083480-1 Rev 3
Additional status bits are shown in 40056 displayed in Table A-6.
Bit Description
0 ApexRp:
LASER POWER STATUS
: Set to 1 when unit’s LASER
current is out of spec, else set to 0
1 ApexRp:
LASER CURRENT STATUS:
Set to 1 when unit’s
LASER power is out of spec, else set to 0
2 ApexRp:
LASER SUPPLY STATUS:
Set to 1 when unit’s LASER
supply is out of spec, else set to 0
3 ApexRp:
LASER LIFE STATUS:
Set to 1 when unit’s LASER
supply is out of spec, else set to 0
4 ApexRp: NO FLOW STATUS: Set to 1 when unit’s flow is below
no flow threshold causing LASER to turn off, else set to 0.
5 ApexRp:
PHOTOAMP SUPPLY STATUS:
Set to 1 when unit’s
photo amp supply is out of spec, else set to
6 ApexRp:
BACKGROUND STATUS:
Set to 1 when unit’s photo
amp background is out of spec, else set to 0
7 ApexRp: PHOTODIODE STATUS: Set to 1 when photodiode has
failed, else set to 0
8 ApexRp:
CALIBRATION DUE DATE STATUS:
Set to 1 when
unit is past calibration due date, else set to 0
9 ApexRp:
LOCATION BRACKET STATUS:
Set to 1 when unit is
in location bracket mode and bracket is missing, else set to 0.
Table A-6 Device Status (40056)