Lighthouse Worldwide Solutions ApexR02p, Руководство оператора

Страница: 32 / 74

ApexRp Operators Manual
31 248083480-1 Rev 3
DIP Switch Definitions
Table 4-1 displays the general DIP Switch settings.
OFF (UP) = 0, ON (DOWN) = 1
Position
#
Description Setting
1 Binary Bit 0 Addressing, OFF=0, ON=1
2 Binary Bit 1 Addressing, OFF=0, ON=1
3 Binary Bit 2 Addressing, OFF=0, ON=1
4 Binary Bit 3 Addressing, OFF=0, ON=1
5 Binary Bit 4 Addressing, OFF=0, ON=1
6 COM Mode See Table 4-2
7 Serial Protocol UP=For Serial Communications, uses
DIP Switch Addressing.
DOWN= For Ethernet
communication (i.e. to communicate
with the Instrument Setup tool).
8 Reserved
Table 4-1 DIP switch general settings
Communication Modes
The ApexRp Serial has options for MODBUS ASCII and
MODBUS RTU. Table 4-2 displays those modes.
COMMUNICATIONS MODE DIP
SW 6
MODBUS ASCII (UP) OFF
MODBUS RTU (DN) ON
Table 4-2 DIP Switch Settings for
ApexRp
Serial COM Mode
Note: Use a tool with a
very small pointed tip
in order to change the
DIP Switch positions.