Light Progress UV-BOX-E3/40H-NX-R, Руководство пользователя

Страница: 6 / 16

LIGHT PROGRESS
UV-BOX-E3/40H-NX-R [Eng.]
Revision 3 - October 2020 Page 6 of 16
RECEPTION
Handle with care. Verify the integrity of the packaging, and be careful not to damage the contents when using sharp
blades or cutters to open the box.
Remove the unit from the box, then inspect it immediately to ensure that no damage has occurred during transport.
Before installation and using the device please CAREFULLY READ AND FOLLOW THE SECURITY WARNINGS and
all others instructions.
INSTALLATION
The UV-BOX-E3/40H-NX-R is a wall cabinet and it is fundamental to install it in a secure location accessible to the
operator.
Take care not to place the cabinet in hazardous locations for the personnel.
To fix the cabinet to the wall, use two screw anchors (8 -10mm) (not supplied), placed at a mutual distance equal to
the distance of the two welded eyelets, behind and at the top on the cabinet.
ELECTRICAL CONNECTION
Make sure that the device will be installed where it will fit with the existing environmental conditions. Before connecting
the device to the electrical line, make sure that the labelled data on the device are the same as the ones of the electrical
line; we remind you that the electrical supply power of this device is 220-240V, 50/60Hz.
Make sure that the electrical system is suitable to provide the supply current required by the device (please read the
label).
The connection to the electrical line needs a multipolar switch.
The connection to the electrical line must be made by the supplied cable 3 x 1 mm
2
.
The use of screws, nuts, or other means, is not required to connect the device to the electrical line.
We suggest the use of counters to know exactly the life of UV lamps and to remember when replace them. Protect
the power supply cable from high temperature, sharp corners, water, oils.
CONSOLE with timer switch for treatment time setting