Light Progress UV-BOX-E3/40H-NX-R, Руководство пользователя

Страница: 4 / 16

LIGHT PROGRESS
UV-BOX-E3/40H-NX-R [Eng.]
Revision 3 - October 2020 Page 4 of 16
DEVICE DESCRIPTION
UV-BOX-E3/40H-NX-R has a stainless steel AISI 304 structure with 2 stainless steel AISI 304 flat grills to support the
objects to be disinfected. The grids support the stored items minimizing dead spots and achieving disinfection of
99.99% in very short exposure times.
The box is equipped with three UV-C 40 W lamps, protected by the grid to prevent hits and damages. The steel door is
equipped with a transparent anti UV polycarbonate window and a position switch for turning off the UV lamps when the
door is opened.
The box is also equipped with a control panel which has an on/off switch and a timer
Irradiation time can be adjusted from 1 second to 500 hours.
APPLICATIONS AND RESULTS
This cabinet can be used for germicidal disinfection and maintenance and sterility of objects and tools for healthcare,
pharmaceutical labs, microbiological labs, food industries, etc.
After washing, the objects can be stored inside the germicidal box, in order to maintain the condition of cleanliness
in time; objects can thus be used with confidence, even after several hours after washing.
UV-BOX-E3/40H-NX-R is among the few items on the market to offer extreme effectiveness, as it possesses three
opposing lamps of high power (40W), which can radiate uniformly in all directions and directly on instruments
surface. Furthermore, the internal reflection increases the amount of UV radiation which invests the instrumentation
from all directions, reducing to zero the micro-shadows and lowering significantly the exposure times.
Very short exposure times are thus obtained to get a 99.9% sterilization.
OPERATION
The switching on / off of the box is controlled by a programmable cycle of pause / working time intervals.
You can decide on the duration of the irradiation and of the pause interval between two subsequent working periods.
Whenever the door is closed, UV lamps turn on and begin the disinfection of the inside space and surfaces. This will
last for the whole programmed working time; the possible opening of the door, during the disinfection action,
immediately shuts off the lamps, in order to ensure personnel safety; if you will close the door again, a new disinfection
action will begin from the start. At the end of the working period, the lamps will automatically switch off. At the end of
the pause period, the lamps will automatically switch on. This sequence allows for the ability to maintain aseptic
conditions even at distance in time.
The duration of the working time and of the pause time is manually adjustable before the beginning of the treatment.
BENEFITS AND ADVANTAGES
A. PHYSICAL ACTION AND ENVIRONMENTAL PROTECTION.
Treatment by UV-C rays is purely physical, and always achieves the same response; also, there are no problems
with overdose and rooms are always safe and practicable (when devices are turned off).
Rather, many methods of chemical treatment involve the use of dangerous products for the environment, and
are difficult to biodegrade, as well as the risk of contamination of foodstuffs. Also, the use of chemicals is likely
to develop resistant microbial forms with consequent danger to human health.
B. IMMEDIATE EFFECT.
It takes just a very short time to obtain effective results (99% killing of the bacteria).
C. PRACTICABILITY AND SAVINGS.
The treatment is immediate and ready for use. The maintenance is minimal with low costs of both energy
consumption and repairs.
D. NO CONTRAINDICATION FOR EQUIPMENT TO BE TREATED.
This device provides the ability to maintain a sterile equipment, without the slightest contraindication. Equipment
to be disinfected, or previously sterilized, can be preserved for a long time and are ready for use, since the
treatment is dry and without heat generation.
E. TOTAL SAFETY.
Ultraviolet rays are confined inside the enclosure and cannot exit due to the UV ray’s resistant polycarbonate
(LEXAN ®) and the micro-switches that prevent UV irradiation when the door is open. Therefore, it may treat the
instruments in the presence of the operators.