Light Progress UV-BOX-E3/40H-NX-R, Руководство пользователя

Страница: 7 / 16

LIGHT PROGRESS
UV-BOX-E3/40H-NX-R [Eng.]
Revision 3 - October 2020 Page 7 of 16
USAGE / PROGRAMMING
ON / OFF SWITCH
This is the cabinets main power switch (green led light power on indicator)
TIMER SWITCH
ON/OFF (OMRON model)
The stopwatch and type Pause/Work; two types of time must be set:
a) The DURATION OF DISINFETION
b) The DURATION OF THE PAUSE between one disinfection and the next.
Proceed with the following steps:
1) First set the desired scale bottom by acting on the cross screws placed
on the stopwatch panel:
• For the bottom scale relative the duration of disinfection you have to act on the screw above "OFF.
We recommend the bottom "min" scale.
• For the bottom scale for the duration of the pause between one disinfection and the next you have to
act on the screw above the inscription "ON". We recommend the bottom scale "hrs." (hours).
• Finally set the bottom scale of the central black quadrant by acting on the screw at the bottom on the
left above the word "OMRON". We recommend the bottom scale "12"
2) At this point you set the time you want by acting on the two overlapping central dials
two arrows, as follows:
• To set the duration of the disinfection you must act on the dial with the indicator Green. We
recommend that you set it to at least 4 (4 minutes).
• To set the duration of the break between one disinfection and the next, the red indicator must be
acted on the dial.
We recommend that you set it to 6 (6 hours).
You can set from a minimum of 1 sec. 120 hours.
Start:
Turn on the box using the ON/OFF switch:
The UV lamps will light up for the chosen time (if the door is closed) and the chronometer will turn on the LED GREEN
for the duration of the disinfection phase. Then you will turn on the RED LED that will signal the pause phase
(UV lamps off). So cyclically the two phases will alternate.