verify where the fault lies (with the light, expansion board, or effects board). To
correct any issues with expansion board ports, please view the section
addressing expansion board issues on our
online troubleshooting guide.
33.)
Turn the set over to the front, then take
4x Adhesive Squares
and stick two
to the back of the Flicker Effects Board, and another two to the back of the
Micro 4-Port Expansion Board. Mount the two boards to the right side of the
black technic brick as shown below:
Neaten up the wiring by grouping the two bit light cables from the fireplace
and twisting/folding them around each other into a neat bunch. Tuck the
bunched up cables through the archway space on the right, then pull the micro
