Note: If you experience any issues with the lights not working and suspect an
issue with a component, please try a different port on the expansion board to
verify where the fault lies (with the light or expansion board). To correct any
issues with expansion board ports, please view the section addressing
expansion board issues on our
online troubleshooting guide.
10.)
Turn the set around to the back, then connect a new
30cm Connecting
Cable
to the 6-port expansion board. Close up the staircase, then thread the
other end of the 30cm cable through the following space that leads to the right
side of the tower. Pull it out from the right side as shown below:
