8
DMX LEAD
The DMX lead is used to link up multiple units. For Wiring connections refer to Fig 3.
DMX TERMINATOR
A DMX terminator helps to reduce ‘noise’ on the DMX chain, and makes the light
respond to control more accurately. It should be plugged in to the last fixture in any chain.
For Terminator connections
refer to Fig 4
QUESTIONS
Symptom Fault
Unit does not power up - Check that the power outlet is turned on and fuse is OK Check
that the mode is set correctly and that you are controlling the unit correctly
Unit chases constantly and not to the beat of the music - Check that the microphone
sensitivity is not turned up too high and that the mode is set correctly
Units do not work or is uncontrollable when linked or in DMX mode - Check that the
mode is set correctly, check that all the leads are OK, check that the controller is set to pin
3 +ve) (If using DMX the lead should come out of the DMX output socket). See Fig 5
Fig 3
Fig 4
Fig 5
