2
Congratulations on the purchase of your P64QUADB2/P64QUADP2 by Light Emotion. We are
confident that you will be satisfied with your purchase. We have prepared this manual to assist
you with the care and operation of this item.
This product uses 12 4in1 5W LEDs to produce vivid colours that the user can control in many
ways. The unit incorporates new lens technology which produces a narrower, more concentrated
beam allowing fewer LEDs to be used to give a brighter effect. The unit features thermal cut-out,
so it will shut down if its interior temperature reaches 85 degrees C – this will prevent damage to
the product in the event of a problem.
Please note that as part of out ongoing commitment to continuous improvement and
product development, the specifications in this manual are subject to change without
notice. Whilst every care has been taken in the preparation of this manual we reserve the
right to change specifications in the course of product improvement.
WHAT IS INCLUDED:
CAUTION
: Do not use sharp objects whilst unpacking this product
• 1x P645QUADB2/P2 lighting effect
• 1x Manual & Warranty card
SAFETY INSTRUCTIONS:
Please read these instructions carefully. It includes important information about the
installation usage and maintenance of this product.
• Please keep this User Manual for future consultation. If you sell the unit to another user,
be sure that they also receive this instruction booklet.
• Always make sure that you are connecting to the proper voltage and that the line voltage
you are connecting to is not higher than that stated on the rear panel of the fixture.
• This product is intended for indoor use only! To prevent risk of fire or shock, do not
expose fixture to rain or moisture.
• Make sure there are no flammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surface. Be sure that no ventilation slots are blocked.
• Always disconnect from power source before servicing or replacing fuse and be sure to
replace with same fuse source.
• Secure fixture to fastening device using a safety chain.
• Maximum ambient temperature is 40°C. Do not operate fixture at temperatures higher
than this.
• In the event of serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance centre.
• Never connect the device to dimmer pack.
• Make sure power cord is never crimped or damaged.
• Never disconnect power cord by pulling or tugging on the cord.
• Never carry the fixture directly from the cord. Always use the hanging/mounting
bracket.
• Avoid direct eye exposure to the light source while it is on.
