3
POWER
CAUTION:
This lighting effect is designed to operate at 240V. Power Consumption:
85W
FUSE
CAUTION:
Only use the correct fuse as specified on the rear panel of the lighting effect.
Disconnect the lighting effect from the mains before attempting to replace the fuse.
To replace the fuse please follow the following steps:
1. Remove the fuse by unscrewing the cap out with a screwdriver.
(Refer to Fig 1)
2. Remove existing fuse.
3. Fit new fuse.
4. Refit the fuse holder.
Fuse: M205 2.0A fast
FEATURES
Static colours
Colour changing
RBGW colour mixing
Audio Activated with sensitivity control
Master/Slave linkable
DMX-512 controllable
INSTALLATION
CAUTION:
For safe mounting read the following instructions carefully.
• Use suitable hook clamps* for hanging the lighting effect.
• Use a safety wire* with a breaking strain of more than
double the lighting effect.
• Do not look directly into the light source.
• Make sure the lighting effect has suitable ventilation as
per the instructions below.
• This lighting effect is intended for indoor use only.
• To avoid electrical shock keep away from rain and
moisture.
• Keep unit out of reach from children.
NOTE:
Use washers* and spring washers* when attaching your
hook clamp* to the yoke.
1. For installation of the hook clamps* and safety wire*
please refer to Fig 2.
2. This lighting effect must be 0.5m away from any
flammable materials or any walls or ceilings.
3. Do not block or inhibit the air flow from the ventilation
holes.
Fig 1
Fig 2
