Light Efficient Design
Tel: (847) 380-3540
www.led-llc.com
7. Place the ballast housing hinge pin over the
cover hinge. Mate the quick disconnect
connectors between the ballast housing and
cover. Close and secure the ballast housing
and cover by tightening the screw.
Incoming
quick
disconnect
wires
Lamp
holder
wires
Installation Instructions GE Lighting Filtr-Gard®
LED-8929***-HAZ & LED-8929***C-HAZ
Quick
disconnect
3
Lamp Installation
8. Remove the optical assembly covering the
lamp such as guards, globes or reflectors by
un-threading.
9. Remove old lamp
10. Firmly tighten LED lamp enough to depress the
center contact of the lamp holder.
11. Replace the optical assembly by threading into
the ballast housing.
12. Apply the silver adhesive label over the
current label on the luminaire which specifies
the replacement lamp and where it will be
visible during re-lamping.
13. Connect electrical power to the luminaire at
the supply source
Example Globe and Guard
