7
10. Replace the monitor back by aligning the guide pins and connector to the
base of the camera tray.
11. Rotate latches evenly until they lock. Ensure the monitor back draws into
the housing straight and evenly.
Operation
The Stingray housing is designed to access basic camcorder features using
electromagnetic switch control sets (left and right side of Stingray) and
mechanical interfaces (front plate).
Right Control Set (fig. 7)
ZOOM Switch
T - Slide forward and hold for telephoto (subjects appear closer).
W - Slide rearward and hold for wide angle (increases viewing angle).
MODE/OFF - REC/PHOTO
MODE/OFF - Slide switch backward and release to toggle between
Camera and Memory modes. Slide switch backward and hold for three
seconds to turn camcorder off.
REC/PHOTO - In Camera mode, slide switch forward and release
to toggle between record and stand-by modes. In Memory mode, slide
switch forward and release to capture an
image to Memory Stick.
ZOOM (T - W) Switch
MODE/OFF - REC/PHOTO
(Fig. 7)
