Ligao JLM-S, Инструкция по эксплуатации

Страница: 21 / 44

18
discharge check valve( see check valve assembly), and
re-start the prime steps.
4.2 Setting
1.Stop State
：

(Screen display “0
%
”
）；
Press "STOP / START" button to
run the pump.

In running state, press "STOP/ START" button to stop
the pump. (Note
：
Remote control mode does not work.)

Setting
：
Long press the "STOP / START" button to
enter the parameter "set status". In setting state, press
"STOP/ START" button for 3 seconds to exit the setting.

If there is no operation after 10 seconds automatically
exit the setting mode.
2.Button Description
：
Stop/Start(Setting) Increase Decrease
STPO
START