USER MANUAL
–
HDN
–
EN VERSION 02.01
Liftup A/S
| Hagensvej 21 | DK-9530 Støvring | Denmark |
T:
+45 96 86 30 20 |
M:
[email protected] | www.liftup.dk | CVR DK-1015 3964
13
10.
Operating the lift
10.1
Daily use
The HDN lift is operated using the two operating panels respectively above and below the
platform, a button panel sited by the platform or by using the remote control (optional
equipment). The remote control replaces or supplements the operating panels.
Call lifting platform - up or down
Remote control (optional equipment)
10.2
Operating the HDN lift from the UPPER level
In order to call the HDN lift to the upper level,
press the arrow button (
). Remember to
press the push button for the entire time, since
the platform will automatically stop when the
button is released.
The lifting platform starts by raising the safety
plates and then moves up to the upper level.
The platform stops automatically when it
reaches the upper level. Now the user can
enter or exit the lifting platform.
HDN lift ready for operation (upper level)
10.3
Operating the HDN lift from the LOWER level
In order to call the HDN lift to the lower level,
press the arrow button (
). Remember to
press the push button for the entire time, since
the platform will automatically stop when the
button is released.
When the lower level has been reached, the
safety plates continue to drive down. When
the safety plates are completely down and
plane with the floor, the platform automatically
stops. Now the user can enter or exit the
lifting platform.
HDN lift ready for operation (lower level)
