USER MANUAL
–
HDN
–
EN VERSION 02.01
Liftup A/S
| Hagensvej 21 | DK-9530 Støvring | Denmark |
T:
+45 96 86 30 20 |
M:
[email protected] | www.liftup.dk | CVR DK-1015 3964
14
10.4
Operating the HDN lift when the user is on it
To operate the lifting platform use the arrow buttons (
/
) sited by the platform or the
remote control (optional equipment).
-
To raise the lifting platform, press the arrow button
(
)
and hold it down until the platform
stops.
-
To lower the platform, press the arrow button
(
)
and hold it down until the platform
stops, and the safety plates are completely down.
11.
Operation
Under normal operating conditions the lifting platform shall always be connected to 230V. The
platform is in standby-mode when it is not being used, and will always be ready for use as desired.
IMPORTANT!
If you notice the lifting platform not working as expected or if it
stops after a few centimetres, technical problems may have arisen which require
remedial work by technically qualified personnel. Contact your dealer for further
help.
