17
X
SECTION 4 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
4.1
• Insert one end of the
Tie Plate (BLC)
into the slot on the
Lower Extension Arm (BGP)
, then iInsert the opposite end of the
Tie Plate (BLC)
into the slot on the other
Lower Extension Arm (BGP)
as shown.
• Do not overtighten the Cap Nut. If the end of the Bolt breaks
through the plastic cap, call our Customer Service Department.
Exposed threads on the end of the Bolt may cause serious injuries.
!
1/2” (13mm)
(x1)
1/2” (13 mm)
(x1)
BLC
BLC
BGP
BGP
AQB
AAN
BGP
BGP
BLC
AQB
(x2)
AAN
(x2)
4.2
• Secure the
Lower Extension Arms (BGP)
together with the hardware shown. Use a 1/2” Socket Wrench to screw the
Thread-
Cutting Bolts (AQB)
through the Lower Extension Arms and the
Tie Plate (BLC)
.
