5
TOOLS AND HARDWARE REQUIRED
X
SECTION 1 (CONTINUED)
1.1
• A Ground Sleeve is available as an alternative to
cementing the Pole into the ground. Please contact
Customer Service for more information.
!
• Dig a round hole 24" deep and 21" in diameter. If
you live in an area where frost heaves may pose a
problem, consult your local building inspector to
determine the proper hole depth. The edge of the
hole should be fl ush with the edge of the playing
surface.
(1)
(1)
1.2
• Make a mark 16 inches from the dimpled
end of the
Bottom Pole (ALE)
(do not scratch
the powder coating). Slide the
Alignment
Frame (BGW)
over the Bottom Pole.
1.3
• Mix the concrete. Save 1/2 bag of concrete mix
to use later in the assembly. Pour the mixed
concrete into the hole until it is fi lled to the level
of the playing surface.
640 lb / 291 kg
(1)
ALE
16”
ALE
BGW
