Lifetime FRONT ADJUST 90599, Руководство по сборке

Страница: 8 / 44

8
TOOLS AND HARDWARE REQUIRED
X SECTION 1 (CONTINUED)
• STOP ASSEMBLY NOW. Do not continue the assembly until the concrete
has been allowed to set for at least 72 hours (3 days). In humid climates
or wet weather, allow more time for the concrete to cure. Do not proceed
until the curing process is complete.
!
• Mix the remaining 1/2 bag of concrete and pour the concrete into the Bottom Pole (ALE) until it is just below the slots
in the top of the pole. Then tamp the concrete down in the Bottom Pole (ALE) with a broom handle to remove any air
pockets. Remember to clean all excess concrete off the outside surface and inside surface of the pole.
1.7
(1/2 Bag)
• Do not overfi ll the Pole or you may not be
able to assemble the rest of the pole sections.
!