LifeSpan TR2000-HRC, Руководство пользователя

Страница: 11 / 28

7
Parts
1: Frame
2: Base frame
3: Support posts (Left)
4: Support posts (Right)
5: Handlebar (Left)
6: Handlebar (Right)
7: Console bracket
8: Handle rail
9: Left cover
10: Right cover
11: Power cord
12: Screw M10*50L
13: Screw M8*70L
14: Screw M8*45L
15: Console
16: Safety key
17: Upper folding tube
18: Folding lock tube
19: Screw M4*10L
20: Base frame bracket
21A: Wire harness
21B: Wire harness
22A: Hand pulse cable
22B: Hand pulse cable
23A: Speed control harness
23B: Speed control harness
24A: Incline control harness
24B: Incline control harness
25: Screw M8*15L
26: Washer M8
Hardware / Tools
Screws Already in Place on the Treadmill
assembly instructions
This treadmill is very heavy. It is a good idea to have two people present if any lifting is required.
We recommend taking off the top portion of the box and slitting the corners of the box that the
treadmill is sitting in. This will allow for the sides of the box to be folded down eliminating the
need to pick the treadmill out of the box.
Prior to starting the assembly process take all of the parts out of the box, remove all plastic bags,
and lay them out on the floor to become familiar with the components. Make sure that you
remove all parts packaged underneath the treadmill. You may need to slightly pick up the back of
the treadmill to get better access to the parts on the bottom. You will notice that the treadmill is
completely assembled except for the handlebars and the console.
Screws in Plastic Bag