LifeSpan R3i, Руководство пользователя

Страница: 38 / 40

4
R3i
If everything is tight, contact LifeSpan Customer Service for replacement pedals
frame components.
Engineering Mode
To Enter Engineering Mode, Press and hold the Enter Button and the Up button for 3 seconds. The
console will beep and display Engineering Mode.
Engineering Mode
Function
Display
Press Enter. The display will show Roller. This is
something that does not need adjustment
Press Enter. The display will show Select the units.
Press the up or down buttons to change between Si
(metric) or EN English modes.
Press Enter. The display will show Set calendar On or
To set the console to go into sleep mode set Electricity
Press Enter. The display will show Total Distance. It will
show 1 digit on the left and 3 digits on the right for a
total of 4 digits. This is the total number or miles or
Kilometers accumulated.
Press Enter. The display will show Total Hours. It will
show 1 digit on the left and 3 digits on the right for a
total of 4 digits. This is the total number of hours the
bike has been used.
Press Enter
Roller
1380
Select the Units
Si or EN
Total Distance
0
000
0
000
Total Hours
Console goes back to normal operating mode
38