LifeSpan LFTM-VIPER-M4, Руководство пользователя

Страница: 32 / 36

32
PROBLEM POSSIBLE CAUSE SUGGESTED ACTION
Treadmill will not
start
Not plugged in Plug cord into outlet
Safety Key not inserted Insert Safety Key
Running belt not
centered
Running belt tension not
correct on the left or right
sides of the running board
Tighten the adjustment bolts on the left and
right side of the rear roller.
Computer not
working
Wires from the computer
and bottom control board
not properly connected.
Check wire connections from the computer to
the control board.
Transformer is damaged
If the transformer is damaged,
contact customer service.
E0 1
Current overload
protection (Self Protecting
System)
Restart the treadmill. Check the incoming
voltage to ensure it is correct. Inspect moving
parts of the treadmill to ensure that they are
operating correctly. Check the motor, listen for
strange noise and check for a burning smell.
Replace the motor if necessary. Check the
control board, replace if damaged. Lubricate the
treadmill.
E02 Motor Abnormality
Check the wire of Motor, re-connect the wire.
Check the motor, replace the motor if necessary.
Check the control board, replace if damaged.
E03 Hardware Overload
Restart the treadmill. Check the incoming
voltage to ensure it is correct. Check whether the
power wire is dropped Check the control board,
replace if damaged.
E04 Motor Abnormality
Check the wire of Motor, re-connect the wire.
Check the motor, replace the motor if necessary.
Check the control board, replace if damaged.
E05
The incoming voltage is
too low.
Restart the treadmill. Check the incoming
voltage to ensure it is correct. Check whether the
power wire is dropped.
E06
The incoming voltage is
too high.
Restart the treadmill. Check the incoming
voltage to ensure it is correct.
XII. TROUBLESHOOTING
| TROUBLESHOOTING