background image

 

3

IMPORTANT SAFETY INSTRUCTIONS  |

I. IMPORTANT SAFETY

   INSTRUCTIONS

WARNING: Read all instructions before using this treadmill.

It is important your treadmill receives regular maintenance to prolong its useful life. Failing to 
regularly maintain your treadmill may void your warranty.

DANGER

To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to 
cleaning and/or service work.

DO NOT USE AN EXTENSION CORD:

DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING IMPROPER ADAPTERS OR IN ANY 
WAY MODIFY THE CORD SET.

   Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.

   Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and

    treadmill may result.

   Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of the

    treadmill and any fixed object.

   Place your unit on a solid, level surface when in use.

   When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should you

    fall or move too far back on the treadmill.

   Keep hands away from all moving parts.

   Never operate the treadmill if it has a damaged power cord or plug. When damaged, these must be

    replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a
    hazard.

   Keep the cord away from heated surfaces.

   Do not operate where aerosol spray products are being used or where oxygen is being administered.

    Sparks from the motor may ignite a highly gaseous environment.

   Never drop or insert any object into any openings.

Содержание LFTM-VIPER-M4





































Отзывы: