23
Drawing 36
Drawing 37
Drawing 38
Drawing 39
4.5. WATT control mode
When user in any mode, press START/STOP button then press RESET to go to main menu.
Press “+” or “-” button and press MODE to enter WATT constant training mode. Entering WATT mode, the preset
value 120 is blinking (
Drawing 40
). User may adjust WATT value by pressing “+” or “-” button from 10~350 with
5W increment and press MODE to confirm.
Then adjust following value:
TIME: is blinking. You may press “+” or “-” button to set up target training time from 00:00 to 99:00. (
Drawing 41
)
Press START/STOP button to start training.
System will adjust WATT level automatically according to the preset target watt data, current RPM and training
speed. If the training speed is quick, resistance level will decrease. Otherwise, it will increase. When stop
training, user can press RESET button to return to main menu.
Drawing 40
Drawing 41
