LifeSize Passport Installation Guide
9
Status Icons
The following table identifies the icons that can appear in the system status bar.
Icon
Condition
Indicates that the communication subsystem is initializing. If this icon reappears after the
system has booted, a problem has occurred. Reboot the system.
Indicates that the system is initializing. When the system is initializing, functionality on the
main screen is disabled and no entries appear in the REDIAL list. This icon also appears
when a new device is connected to the system after the system boots and disappears
when the device is ready. If the icon persists, a problem has occurred and rebooting the
system is necessary.
Indicates that the system does not have an active microphone. Check the device’s
connections and then check the option you selected for the
Active Microphone
preference.
Network Status
Identifies the network status, as follows:
connected (green indicator)
in progress (yellow indicator)
disconnected (red indicator)
Indicates the status of the registration process with the H.323 gatekeeper.
The yellow H.323 icon appears when your LifeSize system is trying to register with the
gatekeeper. If the registration fails, the red H.323 icon appears. If the system is registered
to a gatekeeper, the system shows its status.
Indicates the status of the registration process with the SIP server.
The yellow SIP icon appears when your LifeSize system is trying to register with the SIP
server. If the registration fails, the red SIP icon appears.
System Overheating
The yellow indicator warns you when the system temperature is above normal operating
temperature. The codec adjusts fan speed automatically to cool itself.
The red indicator warns that the system is overheated and approaching the maximum
allowed operating temperature and will automatically reboot after reaching it.
Warning:
Temperatures that require the codec to reboot can permanently damage codec
components. Ensure the room that houses the codec is properly ventilated and
temperature controlled.
