Lifesize Icon Flex Guide
13
Lifesize I
con Flex is DHCP-enabled by default. Connecting an Ethernet cable (see step 6 in
Lifesize I
con Flex as a Voice-only or IP-PBX Device
) automatically discovers an IP address and displays
it on the Lifesize Phone:
To access the administrator interface:
1.
Enter the IP address shown on the Lifesize Phone.
2.
Log in using your username and password (by default, both are set to
admin
).
Your IP address and other network settings are shown in
Preferences > Network
. You can change these
settings or specify a static IP address to connect with the network if your network does not use DHCP. See
Accessing the Administrator Interface using a Static IP Address
Accessing the Administrator Interface using a Static IP Address
If your
Lifesize
Icon Flex is not connected to a network, access the administrator interface using a default
static IP address.
1.
Connect your computer to the
Lifesize I
con Flex RJ-45 port using an Ethernet cable.
2.
Since DHCP is enabled by default,
Lifesize I
con Flex will automatically attempt to acquire an
address. Wait
approximately 30 seconds for the acquisition attempt to time out.
3.
From a web browser, enter
169.254.1.1.
4.
Log in to the administrator interface using the default username and password (both
admin
).
Registering Local SIP for IP-PBX
By default,
Lifesize
Icon Flex supports the SIP protocol for placing and receiving video and voice calls. To
configure or disable SIP, go to
Preferences > SIP Registrar 1
.
Accessing your Corporate Directory
You can configure your Lifesize Phone to access an external LDAP directory at
Preferences > Directory
.
Accessing a directory server allows Lifesize Phone to display user information when initiating a call.
