Lifesize Icon Flex Guide
10
Connecting
Lifesize
Icon Flex as a Voice-only or IP-PBX Device
To connect
Lifesize I
con Flex to the optional Lifesize Phone for voice-only or IP-PBX conferencing, follow
these steps:
1.
Connect the USB B end of the cable to the back of your
Lifesize I
con Flex
and the USB A end
to
your
desktop or laptop USB port.
2.
Remove the cable retention support from the back of your
Lifesize I
con Flex by loosening the
connecting
screw.
3.
Thread the Lifesize Link cable through the cable retention support clip and slide the connecting end
securely into the bracket.
4.
With the cable retention support bracket attached, insert the Lifesize Link cable into the
port on the
back of
Lifesize
Icon Flex. Tighten the connecting screw securely to the device, but do not over tighten.
