background image

model no. 

IFH12A-50

                                                      

 

 

 

 

 

 

Operating instructions

 

 

  1.Power indicator Yellow
  2..CAUTIONindicator Red
  3 Temperature control switch

  

4 High Power

 

5 Low Power

 

6 Medium power

 

TRUCTIONS IN NORMAL MODE

                                Power indicator Yellow                                 

 

The power indicator lights up when the product is powered on

                                CAUTIONindicator Red

                       

When the internal temperature of the product is too  

                                                                                                     high and the temperature limiter is disconnected, the 
                                                                                                     fault lamp lights up

                          Temperature control switch                  This is a mechanically adjustable temperature control. When the product is
                                                                                          heated by turning it clockwise at a certain angle (I: 3000W) , the temperature
                                                                                          of the mechanical control ring is selected according to the LOW-HIGH Angle.
                                                                                         When the temperature around the part reaches a certain value, the product will
                                                                                         stop heating, for long time use, please turn it clockwise to the HIGH position to
                                                                                         ensure the normal operation of the product.
                            High Power                                          High Power (5000W) heating experience is achieved when the shift switch is
                                                                                         pressed to III when the adjustable temperature control is turned on
                            Low Power                                          The low power (3000W) heating experience is realized when the shift switch is
                                                                                         pressed to I when the adjustable temperature control is turned on
                            Medium power                                    The power (4000W) heating experience is realized when the shift switch is
                                                                                         pressed to II when the adjustable temperature control is turned on

Содержание IFH12A-50












Отзывы: