model no.
IFH12A-50
6
2. Remove the mounting bracket from the heating unit by loosening bracket
screws with a wrench and slipping the handle off over the screw heads.
3. Place a washer on screws before inserting through the holes in the
mounting bracket and screw them securely into a ceiling joist.
NOTE:
If you want to swivel the heater either to the right or left adding a
washer to both sides of the bracket is recommended. A longer lag bolt may be
required to properly secure the unit.
HANGING THE HEATER
1) Attach the heating unit to the mounting bracket.
2) Lift the heater up and into the mounting bracket.
3) Align the bracket screws with the keyhole slots in the mounting bracket. 4)
If the heater is to be tilted it must be positioned in the keyhole slots. see
figure 5.
5) Tighten the bracket screws with a wrench so the unit is securely
suspended at horizontal or vertical level.
