model no.
IFH12A-50
4
The heater must be grounded as a precaution against possible electrical
shock. Heater circuit must be protected with proper fuses.
5. The mounting structure and the anchoring hardware must be capable of
supporting the weight of the heater and the mounting bracket (if used).
6. All electrical power must be disconnected at the main service box, which
must be locked before connecting, inspecting, cleaning or servicing the
hater. This is an important precaution to prevent serious electric shock.
7. This is heater is not suitable for use in hazardous locations containing
explosive liquids or vapors. This heater has hot or arcing or sparking
pads inside. Do not use it in areas where gasoline, paint or flammable
liquids are used or stored.
8. This heater is not suitable for use in corrosive atmospheres such as marine
greenhouses or chemical storage areas.
9. This heater must be mounted at least 8 feet off the floor. For specific
clearances, please see next page.
WARNING:
Improper installation or failure to follow the procedures
outlined in this instruction manual can result in serious electrical
shock.
LOCATING HEATER
Install heater away from traffic areas, maintaining clearances stated . The air
flow direction should not be restricted (ie. by columns or machinery). The air
flow should wipe exposed walls rather than blowing
directly on them. When more than one heater is used in an area, heaters
should be installed so that the air discharge of each heater supports the air
flow of the others, to provide best warm air circulation as shown.
