13
The running belt will be deflected more or less under using. Then it needs to
be adjusted. The steps are as follows:
a) Place the treadmill on a horizontal floor, turn the speed to be 5.6km/h for
running.
b) If the running belt is deflected to the right, adjust the bolt on the right by
turning it for half an circle clockwise, then adjust the bolt on the left by turning
it for half an circle.(see diagram 3)
c) If the running belt is deflected to the left, adjust the bolt on the left by
turning it for half an circle clockwise, then adjust the bolt on the right by
turning it for half an circle.(see diagram 4).
d) After the adjustment, the running belt still keeps deflecting, please repeat
the steps above. running belt deflected to right running belt deflected to left.
The adjustment for right deflection (diagram 3)
The adjustment for left deflection (diagram 4)
12
Cut off power firstly and take down the cover of protection.
a)
Loosen the four screws for the motor, adjust them in a circuit clockwise,
then screw down the loose screws.
b)
Keep the power on, and adjust the poly V-belt is loose or not following
the point 3.1 above, if yes, please repeat the action same to point a)
above.
a)
Turn the speed to be 5.6km/h. for runnin.
b)
Turn the bolts at both right and left sides to be half a circuit or a circuit by
the 8mm spanner. ( diagram1 and diagram 2).
c)
After adjustment, running belt still skips, please repeat the steps above.
Tighten the running belt(diagram 1) loosen the running belt(diagram 2
THE ADJUSTMENT STEPS FOR POLY V-BEL
THE ADJUSTMENT STEPS FOR RUNNING BELT DEFLECTION
ADJUSTMENT STEPS FOR RUNNING BELT
