19
MOTORIZED TREADMILL INSTALLING SKETCH
BODY FAT TEST
18
SELF-INSPECTION
No need to self-inspect unless special situation. If necessary, please do it
under the instruction of professional technical people or sales because of
the high voltage.
a
，
open the red power switch, pull out the safe key.
b
，
Press the “start/stop” and ”speed +” key at the same time and keep it,
meanwhile, use another hand to put on the safe key ,then release the
button. of “start” and “speed+” and press the “mode” key, then the LCD
start to show all the data inside.
c
，
after the LCD display finished, then press the “mode” key again.
d
，
the treadmill runs from the lowest speed to highest speed , meanwhile,
the incline is also from lowest to highest. Then treadmill stopped.
The whole self-inspection process takes about 2 minutes
MALFUNCTION
Treadmill can’t be started.
Meter can’t display
Heart rate can’t be displaye
Incline doesn’t work
Running belt runs faster or
slower than what has been
displayed
Running belt slips
Running belt is deflected
