11
Step 5
It is recommended to have a second person assist with this step. One person should hold
the Handlebar Bracket (5) in place while the other person connects the wires.
Connect the Extension Sensor Wire A (77) from the Handlebar Bracket (5) to the
Extension Sensor Wire B (78) that comes from the Right Handlebar Support Tube (16).
Slide the Handlebar Bracket (5) into the both Left/Right Handlebar Support Tubes (15, 16).
Step 6
Secure the Handlebar Bracket (5) to the both Left/Right Handlebar Support Tubes (15, 16)
with six Washers (14) and six Hexagon Socket Oval Head Bolts (17). Tighten bolts with
the Allen Wrench with Phillips Screwdriver provided.
IMPORTANT:
While sliding the Handlebar Bracket (5) into the both Left/Right Handlebar
Support Tubes (15, 16), make sure the wires are installed inside the Right Handlebar
Support Tube (16) and pay attention not to pinch the wires.
5
77
16
15
78
77
78
1
14
17
14
17
16
15
17
14
5
15
17
4
17
14
17
14
14
17
16
14 17
