background image

 

2

SAFETY INSTRUCTIONS

 

Basic precautions should always be followed, including the following safety 
instructions when using this home gym: Read all instructions before using this home 
gym. 

 
1.  Read all the instructions in this manual and do warm up exercises before using this 

home gym. 

2.  Before exercise, in order to avoid injuring the muscle, warm-up exercise of every 

position of the body is necessary.    Refer to Warm Up and Cool Down Routine page.   
After exercise, relaxation of the body is suggested for cool-down. 

3.  Please make sure all parts are not damaged and fixed well before use.    This home 

gym should be placed on a flat surface when using.     

4.  Never drop or insert any object into any opening. 
5.  Please wear proper clothes and shoes when using this home gym.    Do not wear 

clothes that might catch on any part of the home gym. 

6.  Do not attempt any maintenance or adjustments other than those described in this 

manual.    Should any problems arise, discontinue use and consult an 

Authorized  

Service Representative. 

7.  Close supervision is necessary when this home gym is used by, on, or near children, 

invalids, or disabled persons. 

8.  At no time should children under the age of 12 use the home gym.   
9.  Children over the age of 12 should not use the home gym without adult supervision. 
10.  Do not jump on the home gym. 
11.  Do not use this home gym outdoors. 
12.  Inspect and tighten all parts each time before using this home gym.   
13.  This home gym is for household use only. 
14.  Only one person should be on home gym while in use. 
15.  Keep children and pets away from home gym while in use.    The minimum free space 

required for safe operation is not less than two meters. 

16.  If you feel any chest pains, nausea, dizziness, or short of breath, you should stop   

exercising immediately and consult your physician before continuing. 

17.  The maximum weight capacity for this product is 250 lbs/110 kgs. 

 

WARNING:

 

Before beginning any exercise program consult your physician.   

This is especially important for the persons who are over 35 years old or who have 

pre-existing health problems.    Read all instructions before using any fitness 

equipment.

 

 

CAUTION:

 Read all instructions carefully before operating this product.     

Retain this Owner’s Manual for future reference. 

Содержание 63130









































Отзывы: