3
ADJUSTMENTS
Adjusting the Tension Control Knob
To increase the load, turn the tension control knob in a clockwise direction.
To decrease the load, turn the tension control knob
in a counterclockwise direction.
Adjusting the Rear Stabilizer End Cap
Turn the rear stabilizer end cap on the rear stabilizer as needed to level the bike.
Adjusting the Seat Height
Turn the round knob in a counterclockwise direction until the seat post can be slid up or
down and then slide the seat post up or down direction to the suitable position. Lock the
seat post in place by tightening the round knob in a clockwise direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge of seat post bushing.
OPERATING
THE COMPUTER
SPECIFICATION:
TIME:
0:00-99:59 MIN:SEC
SPD (SPEED):
0.0-999.9 KM/H
DST (DISTANCE):
0.00-99.99 KM
CAL (CALORIES):
0.0-999.9 KCAL
PUL (PULSE):
40-240 BEATS/MIN
FUNCTIONS AND OPERATIONS:
AUTO ON /OFF:
When you start pedaling or press the MODE button on the computer, the
computer will turn on. If you leave the equipment for 4 minutes, the power will turn off
automatically.
SCAN:
Press the MODE button until the arrow points to SCAN; the monitor will automatically
scan each function of TIME, SPD (SPEED), DST (DISTANCE), and CAL (CALORIES) in
sequence with change every 6 seconds.
TIME:
Press the MODE button until the arrow points to TIME; the monitor will display your
elapsed workout time in minutes and seconds.
SPD (SPEED):
Press the MODE button until the arrow points to SPD; the monitor will
display the current training speed.
