9
3. Handlebar Post Installation
Remove four M8x15 Bolts (41) and four Ø20xØ8 Big Curve Washers (46) from the tube of
the Main Frame (1).
Connect the Sensor Wire (10) from the Main Frame (1) to the Middle Section Sensor Wire
(13) from the Handlebar Post (27).
Put the cable end of resistance cable of Tension Control Knob (28) into the spring hook of
Tension Cable (12) as shown in drawing A of figure 3. Pull the resistance cable of Tension
Control Knob (28) up and force it into the gap of metal bracket of Tension Cable (12) as
shown in drawing B of figure 3.
Insert the Handlebar Post (27) onto the tube of the Main Frame (1) and secure with four
M8x15 Bolts (41) and four Ø20xØ8 Big Curve Washers (46) that were removed.
28
12
12
28
13
41
46
46 41
A
B
13
10
27
28
12
41
1
Allen Wrench (S6)
Tool:
