Lifebreath Lifebreath TFP3000 Скачать руководство пользователя страница 11

11

Medical Prescription

Operating Instructions and Annual Check-up

Operating Instructions

It is recommended the unit run continuously to provide the full

benefits of particulate removal. Use the OFF/LOW/HIGH speed

selection switch to select high (150cfm) or low (75(cfm) speed.

Maintenance

Annual inspection is recommended for cleaning and replacement

of the Collectors/HEPA filter. Discard and replace the collectors

when required. Normally the primary collector is replaced

annually and the secondary collector is replaced every 2 years.
As each home has differences of size, occupancy, location,

infiltration rates and homeowner needs, it is hard to estimate when

the collectors will need to be changed.
The collectors will slide out. Some discolouration of the collector

medium can be expected and when loose dust falls from the

collector, it is time to replace it. Turn off the TFP, furnace fan and

HRV. Open the door and slide out the collectors to check buildup

and do an annual inspection of overall unit. Before replacing any

collectors, vacuum any dust inside the cabinet or surrounding area.

When replacing the collectors, make sure the directional arrows

are noted and the collectors are installed correctly. Close the door

and restart TFP, furnace and HRV fan.
When your TFP is installed with a forced air heating system you

are still required to use the recommended furnace filter. This may

be a good time to inspect this filter as well.
When new collectors are required, call your dealer.
Model TFP3000 - Two replaceable TFP collectors
Model TFP3000HEPA - 1 TFP Collector, 1 HEPA filter

Disconnect all power sources before attempting 
any service.

CAUTION

Prescription

for

Health Care Product

PATIENT NAME

ADDRESS

PHYSICIAN NAME

ADDRESS

PHYSICIAN SIGNATURE

Your doctor has prescribed the use of an Air Cleaner 

to aid in the relief of your medical condition.

For allowable tax deduction or insurance purposes, please 

retain a completed copy of this form for your records.

TFP-03

Prescription

for

Health Care Product

PATIENT NAME

ADDRESS

PHYSICIAN NAME

ADDRESS

PHYSICIAN SIGNATURE

Your doctor has prescribed the use of an Air Cleaner 

to aid in the relief of your medical condition.

For allowable tax deduction or insurance purposes, please

retain a completed copy of this form for your records.

TFP-03

P

The TFP may qualify for an insurance and/or a medical tax

deduction with a physician's prescription.

Содержание Lifebreath TFP3000













Отзывы: