Life Ionizer 7500, Руководство пользователя

Страница: 38 / 44

www.LifeIonizers.com/Support
38
Q: Why do I want to adjust the amperage on my
Water Ionizer?
A: As you know, all water sources are not created equal.
Your water source plays an important role on how your water
Ionizer creates Ionized Alkaline Water. Being able to adjust
the amperage will allow you to find the optimum pH for the
best production of Alkaline Ionized water based on your water
source.
Q: How do I adjust the amperage on my water
Ionizer?
A: Model 7500, The “Function” button on the top of the unit
changes the choices from the main menu. Press the “Function”
button on to the top of the unit
two times to get into the
amperage menu; you will see on the display panel in ‘white’
letters “Fn2”. Press the “1
st
Filter” button located on the top of
the unit to lower the amperage. Press the “2
nd
Filter” button
located on the top of the unit to increase the volume. Pressing
either of the “Filter” buttons multiple times will increase or
decrease the amperage.
Q: Do I need to hire a plumber to install the units?
A: Most people find it is not necessary to call a plumber for
most standard installations. For custom installations, a plumber
may be needed depending on the individual circumstances.
Q: What do I do if the filters are leaking?
A: It is important to note where on the filter it is leaking. Most
leaking comes from fittings that are not seated properly. Reseat
the tubing into the filter by pushing in firmly and then pulling
back. It may be necessary to re-trim the end of the tubing to get
a fresh surface. Make sure to shut off the water before working
with the water supply lines.
75