18
many doors/windows, how much bare concrete (acts as a heat sink with any type of heating), the
opening and closing of an exterior door, long hallways, high ceilings, etc. Customers with smaller
rooms experience quick heat changes. Rooms with larger and open floor plans can expect up to 24
hours to completely heat up.
I don’t have a grounded outlet; can I use adapters, a 2-prong power strip, or remove the ground
prong from the cord?
Definitely NOT!
If you don’t have a grounded outlet, contact a certified electrician for advice.
Removing or altering any part of the heater’s original design or intent (including the power cord) will
not only void the warranty, but will make you liable for any unexpected or hazardous results.
Why doesn’t the temperature on my heater match the temperature display on my wall, or external
thermostat?
This is completely normal
. The temperature display on your heater may vary from the temperature
display on another thermostat (like the one mounted to your wall or a purchased external thermostat).
This is because the temperature sensor on the heater reads the temperature directly around the
heater. With the heater near the cold floor (and heat rising), any readings on elevated or external
thermostats will differ in readings on the heater.
The best way
to operate your heater is just to set
the unit on “High” and dial up to a temperature that feels comfortable to you. Then, leave it at that
temperature, regardless of the mismatch. The heater will cycle off when the set temperature is met or
exceeded slightly.
My home is not insulated very well, will this heater help me? Can I use the heater if I have vaulted or
cathedral ceilings? I live in a structure that is larger than 1000 square feet. Will this heater help me?
Can I
use the heater to heat multiple rooms at the same time? Will I be able to use the heater in a basement or
garage?
The answer to these is the same.
Yes
. You will be able to use it, but keep in mind that
rooms/structures with open floor plans, minimal insulation, adjacent rooms, or high ceilings will not
retain the heat as efficiently, and noticeable heat changes will come slowly. Also, the heater will stay
on for longer periods of time (since it takes so long to cycle off), and may increase your electric costs.
Note that if you do use it in a garage or basement, the moisture levels must be very low and the
heater must have a dedicated circuit (15 amps minimum) with no GFCI outlets being used. If unsure
what a GFCI outlet is, contact a certified electrician.
Can I use more than one heater at a time? Can I use the heater and another appliance at the same time?
Yes
. But make sure they are not plugged into the same circuit. Each heater (heaters are considered
appliances, and draw out high amperage) requires its own minimum 15 amp circuit
(with no other
items plugged into that circuit or outlet
). If unsure your circuit meets these requirements, verify
with a certified electrician
. Risk of fire, damage to property, or injury may result if requirements
are not met.
Why does my heater’s fan continue to run after the set temperature is reached or the power is turned
off?
This is normal
. The heater’s fan will continue to run, even after the heater automatically cycles
down. The fan continues to run so that every last bit of heat is blown out of the heat chamber, while
allowing the unit to continue filtering your air. Once the internal box/components cool completely, the
