Product Model
:
BM209
Bluetooth Specifications
:
Bluetooth V2.1+EDR
(
A2DP
)
Transmission Distance
:
≤10M
(
depending upon operation environment and devices to which it connects)
)
USB Recharge Voltage
:
DC 5V/800mA
Built-in Battery
:
Lithium battery
Output Power: 3W×2
Frequency Response: 90Hz-20KHz
Sensitivity: 80db±2db
Signal to Noise Ratio (SNR): ≥76dB
Size : 208*φ58mm
Ⅳ
. System Composition
1. Speaker 1 set
2
.
USB Power Cable 1 set
3. User Manual 1 copy
Ⅴ.
Common Function Description
BLUETOOTH OPERATION
1. Turn on the speaker. The white indicator light will flash to detect Bluetooth enabled devices near you. The
white indicator light will go out if no Bluetooth device is detected within 5 minutes.
2. Pair the speaker with the desired Bluetooth device.
3. Play/pause as desired by pressing
/
.
4. When you want to play music or a movie from another Bluetooth device, disconnect and restart the Bluetooth
speaker, then re-pair.
NFC OPERATION
1. Turn on the speaker.
2. Turn on the NFC function on the device.
3. Gently touch the NFC on the side of the speaker with the NFC supported device.
4. A pop-up asking whether to proceed with the connection will appear on the device. Select “yes”.
5. To disconnect the NFC device, touch the NFC again.
AUX PLAYBACK OPERATION
1. Turn the speaker on.
2. Insert an 3.5mm audio cable into the aux jack on the back of the speaker, connecting to any audio device
such as mobile phones or computers with the other port.
3. Press “ /
” to enter mute mode and re-press “ /
” to release sound.
CHARGING THE SPEAKER
The speaker has a built-in Lithium battery. The battery is rechargeable and provides approximately 2.5-hours of
continuous operation when fully charged.
Use the micro-USB cable to charge the speaker. The red indicator light will illuminate. The red indicator light will
go out when the speaker is fully charged.
Ⅵ
. Compatibility
Wireless
:
Devices configured with Bluetooth 2.1+EDR or higher version such as iPAD, iPHONE , iPOD TOUCH
and MAC as well as a majority of intelligent phones or computers that support Bluetooth.
Bluetooth V2.1+EDR consists of protocols like A2DP, AVRCP and HFP and so on.
Ⅶ
. Toubleshooting