background image

GSC2418JB 
Owner’s Manual

 

3

For Your Safety

 

Dear Valued Customer, 

 
Congratulations on your new barbecue grill purchase! You’ve made the right choice. In this manual, you will find 
assembly instructions, suggestions for grilling and helpful hints, as well as guidelines for the safe operation, proper 
care and use of your grill. Our expert staff strives to provide you with an easy to assemble product. Should you have 
any questions or problems with this product, please visit

WWW.BBQTEK.COM

, send email to 

[email protected]

 or call 1-877-885-8227, 6:00 A.M. – 4:30 P.M. PST, MONDAY-FRIDAY.

 

 

NOTE:

 The use and installation of this product must conform to local codes. In the absence of local codes, use the 

National Fuel Gas Code, ANSI Z223.1/ NFPA54. 
 

IMPORTANT NOTICE: READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND USE 

 

Safety First!

 

Read and understand all warnings and precautions prior to operating your grill. 
 
 

WARNING

 

1.    This grill is for outside use only. It should not be used in a building, garage or any other enclosed area. 
2.    The use of alcohol, prescription or non-prescription drugs may impair an individual’s ability to properly 

assemble or safely operate this appliance. 

3.     Always open the grill lid carefully and slowly as heat and steam trapped within the grill could cause severe burns. 
4.    Always place your grill on a hard and level surface far away from combustible materials and structures. An 

asphalt or blacktop surface may is too soft and not be acceptable for this purpose. 

5.    Do not leave a lit grill unattended. 
6.     Keep children and pets away from the grill at all times. 
7.    This is not a tabletop grill. Do not place this grill on any type of tabletop surface. 
8.    Do not use the grill in high winds. 
9.    This grill must be used with propane gas only (propane gas cylinder not included). 
10.   Do not attempt to attach this grill to the self-contained propane system of a camper, trailer, motor home or house. 
1 1 .      Do not use charcoal or lighter fluid. 
12    Do not use gasoline, kerosene or alcohol for lighting. The LP-gas supply cylinder must be constructed and 

marked in accordance with the specifications for propane gas cylinders of the U.S. Department of 
Transportation (DOT) CFR 49, or the national standard of Canada,CAN/CSA-B339. 

13.  This outdoor gas appliance is not intended to be installed in or on recreation vehicles and/or boats. 
14.   Do not attempt to move the grill while it is lit. 
15.   Do not use the grill unless it is 

COMPLETELY

 assembled and all parts are securely fastened and tightened. 

16.    Keep combustible items and surfaces at least 24

 

inches away from the grill at all times. DO NOT use this gas grill 

or any gas product under any overhead enclosure or near any unprotected combustible constructions. 

17.   Do not use in an explosive atmosphere. Keep grill area clear and free from combustible materials, 

gasoline and other flammable vapors and liquids. 

18.    Do not attempt to use or assemble with missing or damaged parts. Contact customer service for a replacement. 

CAUTION-Prevention of Burns

 

1.   To avoid burns, do not touch metal parts of the grill until they have completely cooled for at least 45 minutes, 

or unless you are wearing protective gear such as pot holders, protective gloves or mittens. 

2.    Do not alter the grill in any manner. 

3.    Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts or leaks, the hose must 

be replaced prior to operation. The replacement hose assembly should be in accordance with the 
manufacturer’s specifications. 

4.   Move gas hoses as far away as possible from hot surfaces and dripping hot grease. 

5.   Never keep a filled gas container in a hot car or car trunk. Heat will cause the gas pressure to increase, which 

could open the relief valve and allow gas to escape. 

Содержание GSC2418JB

























Отзывы: