GSC2418JB
Owner’s Manual
10
Step 7
Screw a M6x20mm bolt (B) into each
pre-drilled hole on the let side cart .Make sure
the bolts should be not too tightened .
Insert the bolts screwed on the left side cart
into the holes on the left side shelf (8).
Tighten the bolts
Repeat the same procedure for the right side
shelf (9).
Go back and tighten by the screwdriver.
Step8
Insert side valve shaft into the hole on shelf and
the hole on side burner knob sea(J).
Align the holes on the side burner knob seat
with the holes on the side valve.
Screw a M4x12mm bolt (F into each pre-drilled
hole.
Tighten the bolts by the screwdriver.
