GSC2418JB
Owner’s Manual
9
Step 5
Install body assembly (7) upon cart assembly.
Align the holes on body assembly with the holes
on cart assembly .
Screw a M6x20mm bolt (B) with a M6 lock
washer (D) and M6 washer (E) into each
pre-drilled hole.
Tighten until secure.
Note: Pass regulator from the top gap in the right
cart pane through to the oval hole into cart
assembly inside .
Go back and tighten by the screwdriver.
Step 6
Align the holes on the side lid handle (20)
with the holes on the side lid (19).
Screw a M6x15mm bolt (A) with a M6 lock
washer(D) and a M6 washer (E)into each
pre-drilled hole.
Tighten by hand until secure.
Put side lid upon the right side shelf(9).
Align the hole on the lid hinges with the
hole on the shelf hinges.
Insert a pin (M) into each hinge hole.
Insert a hair pin(L)into the holes in the
end of the end of the pin to fasten the lid
on the shelf.
