GPF2718J
Owner’s Manual
7
Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back check and make certain all the bolts are tighten. Tighten again by the screwdriver provided if it is
necessary.
Estimated Assembly Time: It will takes less than 40 minutes to assembly the grill.
Step 1
Align the holes on the right foot(2) with the holes
on one bottom panel(1) ,screw a M6 bolt(A) into
each pre-dilled hole.
Align the holes at the right foot (2)with the holes at
one the other bottom panel(1), screw a M6 bolt (A)
into each pre-dilled hole.
Repeat the procedure for the left foot(3).
Step 2
Insert the wheel axle (5) into the hole of the right foot. Put
a wheel (4) on each end of the axle.
NOTE: protruding side of each wheel must face the
right foot.
Put an M10 washer
（
G
）
on each end of the axel. Tighten
an M10 nut (H) on each end of the axel toward the wheel.
Make certain that each nut is flat with each end of axle.
