GPF2718J
Owner’s Manual
10
Step7
Slide the side burner shelf (14) from the end
edge of the right side supports(11) and align the
four pre-assembled bolts in side burner shelf
with the four holes in right side supports ,then
tighten the bolts.
Align the four pre-assembled bolts in left side
shelf(15) with the four holes in left side
supports(12) ,then tighten the bolts.
Step8
Place the grill body assembly (16)upon the cart ,
Insert the two burner knobs into the pre-drilled
holes in the top front panel.
Align the venturi tube with the valve.
Connect the ignition wire to electrode on the
main burner.
Open the grill body lid ,screw a M6 bolt(B) and
attach a M6 washer (D)and a heat insulation
washer(K) into the four pre-drilled holes in the
grill body.
Align the hole on smoker box (24-2) with the hole
on grill body ,screw a M6 bolt(B) and attach a M6
washer (D)and a heat insulation washer(K) into
the pre-drilled holes in the grill body, then sealed
a M6 washer (D) and a M6 nut (J).
Slide the smoker box(24-1) on the side edge of
the smoke box(24-2) to cover it .
