GPF2718J
Owner’s Manual
8
Step4
Align the hole in cylinder hook (10) with the hole in the
middle of the right beam (8). Screw in a M6X16mm
bolt (A).
Align the holes in right beam with the holes in top front
panel and top back panel respectively. Screw a M6bolt
(A) into each pre-dilled hole.
NOTE: right beam should be installed on the
same side as the right foot.
Repeat the procedure for the left beam (9).
Step 3
Align the two gourd-shaped holes on the top front
panel (6) with the two pre-assembled bolts on the
bottom panel.
Move the top front panel (6) evenly in the direction
of the narrow end of the gourd-shaped holes.
Tighten the pre-assembled bolts with the
screwdriver provided
Repeat the procedure for the top back panel (7).