10
Step 4
Remove four M6x40mm Bolts (68) from the Computer (41). Connect the Sensor Wire III
(24) and Speed Button and Hand Pulse Sensor Wires (29) to the wires that come from the
Computer (41).
Tuck wires into the Handlebar Upper and Bottom Covers (32, 33).
Attach the Computer (41) onto the Computer Support Bracket (56) with four M6x40mm
Bolts (68) that were removed.
Place the
Safety Tether Key (42) onto the Computer (41).
NOTE:
PLEASE FULLY TIGHTEN ALL HARDWARE INSTALLED IN STEP 1
THROUGH STEP 4 WITH THE ALLEN WRENCH WITH PHILLIPS SCREWDRIVER
PROVIDED.
Allen Wrench with Phillips Screwdriver
Tool:
68
24
42
56
41
32
29
29
68
56
41
32
