PULSE:
The computer will display your current heart rate figures and a heart symbol in 4-5 seconds after you hold both two hands on
handlebar grip sensors during exercise. To ensure the pulse readout is more precise, please always hold on to the handlebar
grip sensors with two hands instead of just with one hand only when you try to test your heart rate figures.
NOTE
1. Before training starts, please make sure the safety tether key is installed properly.
2. During exercising, if your running speed is 3km/h more than computer setting speed, the computer starts to beep to remind you
and the TIME window will display "E1". You need to power on the computer again to stop this reminder.
3. During exercising, if your running speed is 3km/h less than computer setting speed for 30 seconds, the computer starts to beep to
remind you and the TIME window will display "E2". You need to power on the computer again to stop this reminder.
4. During training, you may use OFF button to stop the equipment running at any time, or pull up the safety tether key to stop the
equipment.
5. The computer display will shut off automatically in around 4 minutes if you stop running and did not press any button to the
computer.
6. When there is no signal been transferred into the computer for 4 minutes, the computer display will shut off automatically, and all
previous training data will be stored. You may press any button to reactivate the computer.
13
COMPUTER OPERA
TION
