9
Step 4
Assemble the Right and Left Handlebar Adorners (30R, 30L) to the Handlebar (68) with eight
M3x20mm
Screws (64).
Step 5
Attach the Computer Bracket (82) to the Handlebar (68) with two
M8x55mm
Carriage Bolts (83),
M8
Spring Washers (74), and
M8
Cap Nuts (77).
Step 6
Connect the Sensor Cable I (29), Upper Hand Pulse Cover with Wires (60), Speed Button Wire (62), and Mode Button Wire (63) to the wires
that come from the Computer (70). (See the small diagram of step 6).
Attach the Computer (70) onto the Computer Bracket (82) with four
M5x10mm
Bolts (78).
ASSEMBL
Y
INSTRUCTIONS
4
6
5
