Life Gear 63100 Скачать руководство пользователя

Страница: 2 / 41

TABLE OF CONTENTS

WARRANTY-------------------------------------------------------------------------------- 1

SAFETY INSTRUCTIONS-------------------------------------------------------------- 2

PARTS NUMBERS AND ILLUSTRATIONS----------------------------------------- 3

PARTS LIST-------------------------------------------------------------------------------- 5

MAINTENANCE--------------------------------------------------------------------------- 6

HARDWARE PACKING LIST----------------------------------------------------------- 7

OVERVIEW DRAWING------------------------------------------------------------------ 10

ASSEMBLY INSTRUCTIONS---------------------------------------------------------- 11

CABLE LOOP DIAGRAM--------------------------------------------------------------- 24

PULLEYS AND LAT BAR CABLE INSTALLATION------------------------------- 25

PULLEYS AND BUTTERFLY ARM CABLE INSTALLATION------------------ 29

PULLEYS AND ABDOMINAL CABLE INSTALLATION------------------------- 32

PULLEYS AND LEG EXTENSION CABLE INSTALLATION------------------ 35

WEIGHT STACK COVER INSTALLATION----------------------------------------- 37

WARM UP AND COOL DOWN ROUTINE------------------------------------------ 38

ONE YEAR LIMITED WARRANTY

LifeGear Inc. warrants to the original purchaser that this product is free from defects in

material and workmanship when used for the purpose intended, under the conditions that it

has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's

obligation under this warranty is limited to replacing or repairing, free of charge, any parts

which may prove to be defective under normal home use. This warranty does not include

any damage caused by improper operation, misuse or commercial application.

From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.

This warranty is extended only to the original owner and is not transferable.

When ordering replacement parts please have the following information ready:

1. Owner's

Manual

2. Model

Number

3. Description of Parts

4. Part

Number

5. Date of Purchase

Содержание 63100










































Результаты поиска

Содержание 63100

Отзывы:

Похожие инструкции для 63100

Бренды по названию

Популярные бренды

Life Gear 63100, Руководство пользователя

Результаты поиска

Содержание 63100

Отзывы:

Похожие инструкции для 63100

Бренды по названию

Популярные бренды