14
Step 4
Install each Weight Stack (37) onto the Weight Stack Sliding Rods (6).
NOTE: Ensure that each weight stack’s
selector pin slot faces downward.
Slide the Plastic Bushing (38) onto the Guide Rod (41) and align pin hole. Secure the
Plastic Bushing (38) onto the Guide Rod (41) by inserting the Pin (39) through into the holes
of the Guide Rod (41) and Plastic Bushing (38).
Insert the Guide Rod (41) into the holes of the Weight Stacks (37).
Install the Top Weight Stack (36) onto the Weight Stack Sliding Rods (6) and Plastic Bushing
(38). Place the Big Washer (40) onto the hole of the Top Weight Stack (36). Insert the
L-Shaped Pin (42) into the pin slot.
Install the Top Cover Support (89) onto the Weight Stack Sliding Rods (6).
Hardware:
Weight Stack Pack:
37
6
89
39
37
38
41
40
42
36
37
6
CORRECT
INCORRECT
11 Weight Stacks
(Approximately 62.7 kgs/137.5 lbs)
1 Top Weight Stack
(Approximately 4.5 kgs/10 lbs)
1 Big Washer
1 Pin
1 Plastic Bushing
1 L-Shaped Pin
